charging system
The parts of the charging pile mainly include: charging module, AC distribution unit, monitoring unit, lightning protection unit, fuse, relay, external structure including charging gun, high voltage insulation detection board, display screen and so on.
The charging module is the core of the charging pile, and the performance of the module directly determines the output capacity of the charging pile.
The glue points used in car charging system mainly include charging gun cavity filling seal, charging socket filling seal, charging pile inductance filling seal and OBD charging module thermal conductivity filling seal.
Model | Application product | Product type | component type | curing conditions | Advantages |
MDPU 8608 | Charging gun cavity potting | polyurethane | Two-component | room temperature curing or heating curing | Excellent flexibility after curing |
MDPU 8603 | Charging gun cavity potting | polyurethane | Two-component | room temperature curing or heating curing | Low viscosity, long operation time |
MDEP 3225(8#) | Charging socket potting | epoxy | Two-component | room temperature curing or heating curing | Good toughness, good adhesion |
MDSI 6230(15#) | Inductive potting of charging pile | Silicone | Two-component | room temperature curing or heating curing | thermal conductivity 1.5W/m.K |
MDPU 8608 | OBD charging module heat conduction potting | polyurethane | Two-component | room temperature curing or heating curing | Excellent flexibility after curing |
MDSI 6230(15#) | OBD charging module heat conduction potting | Silicone | Two-component | room temperature curing or heating curing | thermal conductivity 1.5W/m.K |
MDEP 3115 | OBD charging module heat conduction potting | epoxy | Two-component | room temperature curing or heating curing | Heat curing, high TG, high thermal conductivity |